Yamaha Outboard Technical and Maintenance Information for You!
When rigging or repowering a boat with Command Link® (CL) gauges, (Round gauges, Square gauges, 6YC display, CL5 display, CL7, CLPlus 6Y9 and NMEA 2000 MFD’s) make sure that you connect the trim signal wire. Usually you will see full up reading or one segment blinking of the trim reading isn’t there. The pink wires, […]
Today’s boater demands convenience, and insists on accurate and instant information about boat and outboard systems. With the plethora of modern electronics, the call is for more information and more available dash space than ever before. Yamaha answers the call with the 6YC “Information Station” display. The 6YC Information Station display gives boat owners detailed […]
Have you wondered what the engine icon appearing on the Command Link® 6Y8 round gauge means? The icon may appear even if the engine seems to be running fine. If taken to a dealership, your dealer may not find a code or anything wrong. Unlike its sister gauge, the 6Y8 square gauge, the new round […]
Have you ever set up the favorites section on a 6Y9 Command Link Plus® display? If yes, did you immediately wish there was an easier way to configure the favorites other than manually selecting settings for up to 12 pages within the CLP display? Luckily, the 6Y9 Command Link Plus display has you covered. The […]