When installing a speed or water sensor, it is important to not apply force to the plastic connector. If force is applied to the plastic connector instead of the metal nut, the internal wires will break. This will cause the connector to spin. To check if the connector is broken, look at the blue dot. […]
Tag: tech tip
Quick Tip: Hex Driver
There are a few places on our motors where hex drive fasteners are used, typically on upper casing aprons and water intake screens. A thread sealant is applied to the apron fasteners to prevent salt and mineral build up from making the screws impossible to remove. While minimizing the effects of salt, the sealant can […]