Command Link is a plug and play digital data stream that allows the dealer to use the engine’s Command Link capability for easy rigging. The single engine kit is designed for small fishing boats that do not need bus hubs for the complicated rigging often found on larger, multi-engine boats. The gauge kit includes an […]
Tag: Install
Tech Tip Corner: Installing Speed and Water Sensors
When installing a speed or water sensor, it is important to not apply force to the plastic connector. If force is applied to the plastic connector instead of the metal nut, the internal wires will break. This will cause the connector to spin. To check if the connector is broken, look at the blue dot. […]

Sensor Installation
While installing most new sensors is an easy procedure, a simple mistake can easily damage them. Water pressure sensors are a good example of this. The sensor itself is installed into a large metal body. During sensor installation or removal, if force is applied to the “connector” portion of the sensor instead of the metal […]